How to install Xprog-M Xprog V5.60 on Win7 ?

The newest XPROG-M v5.60 with USB dongle has been tested successfully now, and first released at obd2sale.com. Here is the Xprog v5.6 software installation instruction on Windows 7 32 bit.

Software version: V5.6.0

Operating System: Windows XP/ Windows 7 32-bit

Note:

XPROG v5.6 software can not be used with older Xprog-m firmware. It only can work with XPROG v5.6 ecu programmer. No anti-virus program. No software update.

Preparation:

Open DVD disk (E:)

Copy XPROG 5.6.0 zip file to Desktop

Extract XPROG 5.6.0 zip file on Desktop and open the folder

Part 1 – Install Adobe Reader XI

Open XP 5.6.0 folder-> AdbeRdr11000_zh_CN application

Preparation steup…

Click Next

Auto install, click Install

Installing Adobe Reader XI…

Adobe Reader XI installation success. Click Finish

Part 2 – Install Registry Editor

Open XP 5.6.0 folder-> Registry Editor2

Yes to continue

Keys and values have been successfully added to the registry. Click OK

Part 3 – Install driver software and computer management setup

Copy XPROGBOX 5.60 English from E:/XP 5.6.0 folder to local disk C:

Prompt: installing device driver software…(in the button menu column)

Click the prompt info and click Close

Prompt: Device driver software was not successfully installed

Click the prompt info and click Close

Open Computer Management

Select Device Manager-> XPROG-BOX

Right click for Update Driver Software…

Browse my computer for driver software manually

Browse Desktop/ xp 5.6.0/ XPROG-BOX drive/ WINDOW XP

Then OK.. Next

Install this driver software anyway

Windows has succesfully updated your device software. Click Close

Back to Computer Management

Select Device Manager-> Other Device-> USB Serial Port

Right click for Update Driver Software…

Browse my computer for driver software manually

Browse Desktop/ xp 5.6.0/ XPROG-BOX drive/ WINDOW XP

Then OK.. Next

Install this driver software anyway

Windows has successfully updated your device software for XPROG-BOX programmer (COM4). Click Close

Then you will see Ports (COM & LPT)-> XPROG-box programmer (COM4)

Select Device Manager-> Human Interface Device-> USB Input Device

Part 4 – Read and Write AT93C66 with XPROG V5.60

Open local disk C:-> XPROG-BOX 5.60English-> XprogDesktop application

Accept the agreement

Click Device

Select Serial EEPROM/ Atmel/ AT93C66

Click New, then Read

&nbnbsp;

Click Write to write file to the device

Close NONAME2 and NOT save changes to NONAME2

Again, click New, then Read

Close NONAME2 and NOT save changes to NONAME2

Again, click New, then Read

Close NONAME2 and NOT save changes to NONAME2

Send XprogDesktop application to Desktop to use for convenience

No eeprom option in OBDSTAR X100 pro, how to use EEPROM PIC adapter?

Starts with my question: how to use the eeprom adapter of OBDSTAR X-100 PRO? There is no EEPROM MENU in the handheld….. But I bought X100 pro with C+D+E configuration included in package two EEPROM adapter.

There is no eeprom option in my device.

OBDSTAR-X100-PRO-EEPROM-BLOG-1

Finally, I sort it out, I did like this:

Just contact my supplier then give serials they will activate eeprom for me.
Must return to the OBDSTAR official site www.obdstar.com download section then get the new display for my x100pro.

Then connect X100 pro key programmer with vehicle or power supply and turn on the machine, finally connect the EEPROM adapter or chip with the X-100 pro main unit. Follow the system operation and select EEPROM function

After that everything will be ok

Step-by-step instruction on how to use EEPROM PIC adapter to read write with X-100 pro. Please reading following parts

FYI, EEPROM PIC adapter is available now and no need buy separate on the dealer site.

Eeprom PIC adapter connected to x100 pro and in working status

OBDSTAR-X100-PRO-EEPROM-BLOG-2

Enter OBDSTAR X-100 pro menu, select Vehicle.

OBDSTAR-X100-PRO-EEPROM-BLOG-3

See EEPROM adapter option

OBDSTAR-X100-PRO-EEPROM-BLOG-4

Enter PIC/ Freescale adapter

OBDSTAR-X100-PRO-EEPROM-BLOG-5

PIC authorizing…

OBDSTAR-X100-PRO-EEPROM-BLOG-6

Have EEPROM and PIC option

OBDSTAR-X100-PRO-EEPROM-BLOG-7

Select “eeprom RW”

OBDSTAR-X100-PRO-EEPROM-BLOG-8

Choose “24CXX series”

OBDSTAR-X100-PRO-EEPROM-BLOG-9

Choose “24C01 series”

OBDSTAR-X100-PRO-EEPROM-BLOG-10

Input value

OBDSTAR-X100-PRO-EEPROM-BLOG-11

Save file

OBDSTAR-X100-PRO-EEPROM-BLOG-12

Press f2

OBDSTAR-X100-PRO-EEPROM-BLOG-13

Done

OBDSTAR F108 PSA Pin Code Reading and Key Programming Tool Review

Obd2sale engineers has successfully hooked up OBDSTAR F108 PSA PINCODE tool key programmer to read PIN code/ security code for Citroen C5 2011 year.

Top 3 Reasons to Buy F108 PSA Pin Code Tool:

1. The main unit system adopts ARM high-speed chip to keep it running fast, stable and anti-jamming.
2. Software update at official website www.obdstar.com with TF card at any time, and 1-year free update.
3. Language available: English

Dealer Code: 860755B1 or 860010A1
Free update for one year,60 usd/year after one year

OBDSTAR F108 can read pin code for mainly PSA group vehicles (Peugeot, Citroen and DS), the workable specific models are below.

Peugeot 1007
Peugeot 206
Peugeot 207
Peugeot 208
Peugeot 2008
Peugeot 301
Peugeot 306
Peugeot 307
Peugeot 308
Peugeot 3008
Peugeot 406
Peugeot 407
Peugeot 4007
Peugeot 508
Peugeot 5008
Peugeot 607
Peugeot 806
Peugeot 807
Peugeot Bipper
Peugeot Expert
Peugeot Partner
C2
C3
C3 Picasso
C3 Pluriel
C4 Cactus
C4 Picasso
C5
C8
C-Elysee
Xsara Picasso
Berlingo 2
Berlingo 3
Jumper
Jumpy
DS3
DS4
DS5

Package Including:

1pc x F108 main unit
1pc x TF Card