SuperOBD SKP-900 Hand-Held OBD2 Auto Key Programmer FAQ

Original SuperOBD SKP-900 Hand-held OBD2 Auto Key Programmer Update to V5.0

SuperOBD SKP-900 Key Programmer is Hand-held OBD2 key programmer. SKP-900 Key Programmer can support almost all cars in the world, such as Ford, Land Rover, Chrysler, Jeep, Toyota, Nissan, Honda, Mitsubishi, Hyundai, Kia, and so on…

Your SKP-900 can update to the latest V3.3 now, first register on Official Website with our dealer code 1001, after register well,and you can find your own update file in “My Update” when you log on the website again.

SKP900 FAQ:

Q: What’s the language of SKP900?
A: SKP900 has English Version and Portuguese Version

Q: What’s the difference with SKP100?
A: SKP900 and SKP100 are from the same factory, while SKP900 can cover more and latest car models, and version updates faster on the offcial website

Q: How can I get more tokens?
A: SuperOBD SKP-900 is with 50 tokens, after you use up, you can go to the SKP-900 official website to get more. It’s for free.
Q: This skp-900 CAN read pin code? 
A: yes, SKP-900 can read pin code for many vehicles.
Q: SKP-900 supports all car key lost?
A: SKP-900 supports all car key lost of some cars
Q: SKP-900 can program Toyota G chip?
A: yes, SKP-900 can program Toyota G Chip.

MPPS V21 Update + WIN7 Installation Guide for MPPS V18

Pay attention mates! Now you can update MPPS V18.12.3.8 to latest MPPS V21.0.1.3!

(Tested OK by eobdtool.co.uk engineers.)

How to install MPPS V21 software on Windows 7?

Below is a guide for you!

MPPS V18 update to MPPS V21: How to install MPPS V21.0.1.3 on Windows 7?

Step 1

Open DVD/CD-RW Drive (E:) mpps and extract “EU MPPS V21” zip file.

After that, copy “MPPS” folder to Local Disk (C:).

 

Step 2

Right click “My Computer” and choose “Manage”.

Go to “Device Manager” and find “Amt Flash”.

Right click “Amt Flash” and choose “Update Driver Software”.

It will pop up a question window: do you want to search for driver software?

Choose “Browse my computer for driver software”.

Click “Browse” button and choose “C:/MPPS/Device Driver” as below:

 

Step 3

Click “Next” then “Install”. (Remember to check the box “Always trust the software from…”)

And MPPS V21 driver software install successfully!

Now the new amt flash is updated.

 

Step 4

Go to Local Disk (C:), right click “MPPS” folder and choose “Send to” “Desktop”.

Now you successfully install MPPS V21 software!

Open the MPPS V21 shortcut on desktop to use it!

MPPS V21 car list:

For example Renault Avantime, Clio, Kangoo, Luguna, Megane, Scenic, Traffic, etc.

 

OBDSTAR X300M X300-M Car List and Customer Feedback

Description

OBDSTAR X300M is another new odometer adjustment tool launched by OBDSTAR. It’s designed completly according to industrial standard.It’s easy to take away and shockproofed.

obdstar-x300m-for-odometer-adjustment-and-obdii-1

OBDSTAR X300M Vehicle Coverage:

AUDI/ VW/ SKODA/ SEAT, BENTLEY, BENZ, BESTURN, CHRYSLER(CHRYSLER/ DODGE/ JEEP),CITROEN, FORD, FIAT, GEELY, GM(BUICK/ CADILLAC/ CHEVROLET/ HUMMER), GMC, GREATWALL, HYUNDAI, INFINITI, JAGUAR, KIA, LANDROVER, MAZDA, MITSUBISHI, NISSAN, OPEL, PEUGEOT, PORSCHE, PONTIAC, PROTON, RENAULT, ROEWE, SATURN, SMART, SSANGYONG, VOLVO  etc.

OBDSTAR X300M  Mileage Programmer Car Model Test OK (Customer Feedback)

focus 2013 OK
fiesta 2012 OK
grand punto 2010 OK
punto 2007 OK
grand cherokee 2013 OK
astraj 2010 2011 2012 NOT OK
Fiat fiorino obd ok
Audi A4 2007… in 20 seconds by OBD.
2013 jetta mono display ok.
Chevrolet CRUZE 2012, Read security code ok and Mileage ok
Cruze 13 miles ok
Volkswagen Amarok 2014 ok ( chose golf NEC 24C64 white meter 2013-)
Porsche Cayenne 2012 mileage OK
Skoda Octavia 2010 nec+24c32 VDO mileage OK
Skoda Superb 2012 via obd mileage ok
Polo 2004 VDO k Line mileage OK
have made KM visteon dash 95320 vw golf 5 with success, just plug and play
MILEAGE
Mazda 6-2015 via obd -ok
Mazda 3-204-2015 obd-ok
Octavia 2012-nec24c64-ok
2010 Cadillac escalade odo via obd – ok
fiat qubo/fiorino obd ok
audi a4l 2012 by obd ok
KIA Sportage 2014 + with D70F3536 (no external EEPROM) ok
KIA Optima 2014 + with D70F3536 (no external EEPROM) ok
KIA Sorento 2014+ with D70F3523 (no external EEPROM) ok
Hyundai I20 2015+ with D70F35xx (no external EEPROM) ok
Hyundai Genesis 2015+ with D70F3523 (no external EEPROM) ok
hyundai accent (korea) 24c16 obd not ok but choose AZERA D70F3423 and read km write ok and did same with RIO but choose kia ceed D70F3423
even when i open dash they had 24c16 and D70F3423 hope that saves time for you as did to me
2012 jetta nec+24c64 black/white display-20 sec ok
Ford Ecosport 2014 1 min by obd ok, It’s like new fiesta same cluster Ecosport
Citroen Nemo 2008 – OK
Fiat Fiorino 2010 – OK
Fiat Fiorino 2012 – OK
VW T5 2011 – OK
Chevrolet Cruze 2010 – OK
Chevrolet Cruze 2011 – OK
Dodge Durango 2007 (as Chrysler RAM 2006-2008) – OK
Hyundai Accent 2011 – OK
Hyundai Accent 2012 – OK
Opel Insignia 2010 – OK
Peugeot Bipper 2012 – OK
Mazda cx-9 2008 ok

Newest MPPS V18 Clone Review+ Feedback (Feb 2017 Tested)

This blog is about newest tested MPPS V18 review and feedback. Check below to know which ECU models MPPS V18 clone read write successfully!

MPPS-V18-PCB

MPPS V18 EU It works perfectly with PCR 2.1

Someone said VW PCR 2.1 doesn’t work.

But mine does no problem, first one l tested, also read and write on bench too. l dont use resistors

Renault SID305 BOOT sak1766 read – write Ok.

Eeprom R/W and Flash R/W on VW Golf EDC15P worked perfectly with MPPS V18. Via OBD while the ECU was installed in the car

Kangoo EDC17C42 bootmode TriCore R/W = OK

MPPS boot ST10 tab generic it works.

Alfa Romeo EDC16C39-5.5 CAN, ok perfect! Reading in less than 2 minutes
Corsa D 1.3 CDTI, EDC17C18, 70.0kw 2010, Z13DTE R/W boot mode Tricore = OK

GOLF V 1.6 FSI, MED9.5.10, OBD/CAN R/W (30 minutes) = OK

Tried on edc15, 16, 17 and opel denso everything works

Today I did Insignia 17cp19 TC1792 in boot mode.
Mpps processor recognized as the TC1766.
Read OK I compared with Galetto.

 

Fiat Doblo 1.3 mjet mjd6f3 obd – r/w ok
Range Rover edc17cp11 boot – r/w ok

 

Lacetti (2008y) 2.0 CDRi EDC16C39 R/W CAN (only map 2Mb) as Captiva = OK

 

BMW e91 330xd edc16c35 R-W OK

 

Astra vxr me7.6.2 R/W OK (But try this ecu on your own risk!)

 

Mazda 6 2.0 MZR-CD 110hp Denso RF8G- OBD R/W – OK

Opel vectra C, PSG16 can, direct conexión to pump,read-write-cks, all Ok.
Simos Pcr2.1, obd read-write-cks ok

Polo SIMOS 3PE 1.2 12v read/write as generic simens SIM4LE boot mode flash 512kB – OK (catalyst off)

Ford edc16c34 2.20 r/w ok

Mazda 3 1.6 TD 2009, edc16c34 read write via OBD fine

Two advantages make me prefer MPPS V18 than KTAG/KESS

  1. psg16
  2. No token, write some ECU EDC16 OPEL full by OBD

NEW KESS V2 FW 5.017 write Toyota Yaris 2NZ-FE OK

New KESS V2 FW 5.017 review here:

KESS V2 5.017 write Toyota Yaris 2NZ-FE engine ECU by OBD OK. Below are how-to steps for checking

Note: Now KESS V2 Firmware 5.017 with token reset button is only €179!

 

How to write Toyota Yaris 2NZ-FE ECU data OBD by KESS V2 FW 5.017?

Connect KESS V2 FW 5.017 directly with Toyota Yaris via OBD port.

Open KESS V2 5.017 Ksuite 2.22 software.

Choose Manufacturer: Toyota, Model: Vitz (P9x), ECU Type: 2NZ-FE year 2007

Click “ID” and “Select”.

Switch on dashboard.

It show 2NZ-FE engine ECU information.

Family: TOYOTA DENSO 76FOOXX CAN

Switch off dashboard.

Click “Writing” and “Select”.

Now choose the right ECU file for Toyota Yaris 2NZ-FE to write.

Switch on dashboard.

When it ask “Proceed to write?” click “OK” to continue.

And warning message will show if not select the right file, ECU will be damaged.

Click “OK” to confirm.

Now just wait ECU writing process complete 100%.

KESS V2 FW 5.017 write Toyota Yaris 2NZ-FE ECU successfully! Steps are easy…

Tips: Check KESS V2 FW 5.017 new ECU list and protocol screenshots one by one?

All here:

http://www.obd2sale.com/kess-firmware-v5017-obd2-ecu-programmer.html

How to register and activate Launch X431 Diagun IV?

2017 New Released Launch X431 Diagun IV Powerful Diagnotist Tool

User registration

Tap “Login” on the upper right corner of the main menu screen:

  1. If you are a new user, tap “New Registration”. See Fig.2

Note: To obtain better service, you need to provide real information.

A. Create App account: In Fig. 3, fill in the information in each field and then tap “Register”, a screen similar to the following will appear:

B. Activate the VCI connector: In Fig. 4, input the Serial Number and Activation Code, which can be found in the password envelope.

Note: To exit and activate it later, tap “Skip”. In this case, you can activate your connector by tapping “Activate Connector” in “Personal Center”.

 

 Activate Connector.

C. Download diagnostic software: Tap “Activate”, a dialog box similar to Fig. 5 will appear:

To download the diagnostic software, tap “Yes” to enter the software download page. Tap “No” to download it later. On the download page, tap “Update” to start downloading. It may take several minutes to finish it, please be patient to wait. To pause downloading, tap “Pause”. To resume it, tap “Continue”. Once download is complete, the system will install the software package automatically.

 

  1. If you have registered to be a member, input your name and password, and then tap the “Login” button to enter the main menu screen directly.

Note: X-431 Diagun IV has an auto-save function. Once the username and password are correctly entered, the system will automatically store it. Next time you login the system, you will not be asked to input the account manually.

 

  1. If you forgot the password, tap “Retrieve Password”, and then follow the on-screen instructions to retrieve it.

How to set up X431 Diagun IV Bluetooth?

Bluetooth Setting

Enter X-431 Diagun IV Bluetooth setting screen (“Settings” -> “Bluetooth”), slide the Bluetooth switch to ON and X-431 Diagun IV will start searching available Bluetooth device, tap the desired connector to pair. By default, the Bluetooth name is 98729*****00 (where ***** stands for 5 digits.).

Note: In case no Bluetooth setting is done before diagnostic software is launched, you can also configure it while using the software.