Download/install/activate/configure Xentry OpenShell XDOS 12.2017

Free download 12.2017 Xentry Diagnostics Open Shell XDOS and then install, activate/configure sw on Window 7, Windows 8, Windows 10 for Mercedes diagnostic and programming.

I am just sharing what bros in forums is supposed to be about. I’m not responsible for any bad use.

Free version:

Xentry Diagnostics Open Shell XDOS 12 2017-Torrent.rar (57KB)!NDRSSZ7J!o2QYnZXAPPpz7e0eZ5W2LaCrU5tV6yJ-nGCWSopnS-w

No password required!

New Bomb : StartKey Center Deleted on System
New Activation System Started
OLD Key & New Key is working 100%
This version need  2221-45 & 3.91 Error Fix + DAS Blacklist Fix + DAS License 0 Fix
Windows 7-8-10 x86 system not SUPPORT any more


Tested version:

Xentry Diagnostics Open Shell 09.2017 Windows 7 Windows 10:

Tested & Confirmed to work perfect with SDconnect C4 & Xentry Connect C5

12.2017 XDOS installation:

You will not able to install this version on 32-bit system only 64-bit
In level 436 system go rolling back

Note: install x86 and x64 java, enable firewall and installation will go through

Note: if your installation is not complete.. just for a simple reason:

BoschVCI requires an X64 processor!!

Update: windows 32 bit and works well (so HHTWIN can still be used)

12.2017 XDOS Windows 32 bit fix

12.2017 XDOS Configuration: via Config Assist

Looks like they have moved to the “Config Assist” like the Tab 3 instead of Start Key Center..

Should be pretty easy to mod for old keys, just need the magic makers to do their thing

Very likely that in the future they want to remove MB SDconnect c4, and they will go with the new Xentry VCI


12.2017 XDOS Activation: via Startkeycenter

This is the Startkeycenter I used to activate 12.2017 Xdos with old keys. Move the folder to C:>PROGRAM FILES(x86)>MERCEDES BENZ. Launch startkeycenter from folder. Insert keys for xentry only. For DAS you should move the LIC.SLI file to C:PROGRAM FILES(x86)>MERCEDES BENZ>DAS>BIN which will activate it with no timeout. Blacklist is self explanatory which folders they should go in. I don’t claim any of this files……




New & Old keys working 100%:

No problems activating with new keys, have a look at this:

Also No problem with old keys. Xdos 12.2017 installed and activated …Fully working….. I even did a transmission program and scn coding on a 221. For old keys all you need is a modified startkey center folder. Copy toC:\Program Files (x86)\Mercedes-Benz. After key installation you can erase folder. Of course you will need 2221-45 and 3.91 error fix, Das timeout fix and blacklist.

2221-45 & 3.91 Error Fix :!5eJCDYYQ!IOEbhJl89KuB0J2BXrCHz8QJs4BLoJswhsRxhPGSayA

12.2017 Xdos Car List:

New cars: 118, 167GLE, 177, 238, 247B, 257, 290, P470_1, Spr907, Spr910, Vit448, V-K448

Lonsdor K518ISE is most powerful key programmer

K518ISE key programmer is the latest version of Lonsdor, English version, Android based, online upgrading, updating and activating.
Support Immobilization, Odometer adjustment, VW 4th&5th IMMO,Free BMW FEM key programming

Comparison with other key programmer:

Product Name Lonsdor K518ISE SKP1000 OBDSTAR X300 Pro3 SKP900
Appearance Lonsdor K518ISE skp1000 OBDSTAR X300 Pro3 SKP900
Price $1,195 $477.99 $494 $377
Manufacturer Lonsdor Lonsdor OBDSTAR SuperOBD
Official Website
Update Method update online Lifetime free update software and firmware update online update online
Vehicle Coverage has a wide range of vehicle coverage, incl. the luxury cars
i.e BMW, Volvo, Ferrari, Bentley, Lamborghini
as well as Volkswagen 4th 5th IMMO,Toyota/Lexus smart key all key lost via OBD etc.
nearly the same vehicle coverage as SuperOBD skp900 Obdstar x300 vehicle list
Find the function you want,and download the vehicle list pdf to check
Support almost all vehicles in the world
Functions OBD mileage adjustment, oil/service reset, ETC, EPB, EEPROM chip read.
Odometer adjustment
Built-in Volkswagen 4th 5th adapter
Built-in Chip & remote detection module.
Free BMW FEM key programming
Special function:OBD mileage adjustment, remote controller, oil/service reset, ETC, EPB, EEPROM chip read. X-300 pro3 Key Master will covers Skp-900,
OBDSTAR X100 Pro and X300 Pro function, which can support Immobilizer, Odometer Adjust.
Eprom/PIC, OBDII, EPB, Oil/Service reset and Battery Matching…
Key programming,read pin code

Powerful Features:

Volvo (S40, S60, S80, XC60, XC90, C30, C70, V40, V60, V70) key programming.
Toyota/Lexus: smart key all key lost – via OBD ( without dismantle)
BMW CAS3/CAS3+/CAS3++: direct OBD programming
BMW CAS4/CAS4+: dismantle & read data programming
16 -New Maserati: smart key programming
16 -New Ford: smart key programming
Hyundai / Kia 46/47/8A smart key: PIN code reading via OBD, all key lost included.
Renault ( Megane, Koleos, Scenic) without PIN code key programming
VAG group 4th & 5th immobilizer system
Ferrari (458, F12, F149): direct OBD programming
Peugeot /Citroen: two ways to read PIN code & programming, all keys lost included.

A new key programmer, works perfect!

How To Used Lonsdor K518 Program Isuzu D-Max Remote Key

Guide to program remote key on a Isuzu D-Max 4×4 with Lonsdor K518 key programmer via OBD.

Lonsdor K518ISE Isuzu Vehicle List


Series Origin Year Fuel Type Function
D-MAX Other Other Other Immobiliser System 1
MU-7 Other Other Other Immobiliser System 1
D-MAX Other Other Other Immobiliser System 3
MU-X Other Other Other Immobiliser System 3


Connect Lonsdor K518ISE host with vehicle via OBD diagnostic socket

Select Immobilizer->ISUZU->D-MAX->Program remote


Turn ignition switch to ON position


Maximum 5 keys can be programmed


Close all doors and open the door on driver side


Lonsdor K518 identifies current remote key number: 0


Press the Unlock button of the remote key for 5 times until the indicator flashes


Programming complete, press YES to program next key


Repeat and program next remote



Program success.

K518 displayed 1 remote has been programmed.

Press YES to Auto Key Programmer other key or NO to go back.

Test the remote key.


How To Solved Xtool X100 Pad Tablet Not Start After Update


I have a problem with Xtool X100 Pad tablet key programmer. After update system x100 pad tablet stopped booting and did not start.

Before that on display show me system update i download then tablet has self reset and turn on. Then on display show only xtool logo don’t run android system.

What can i do? Need to do factory reset on the pad? engineer solution:

1) Download the Xtool X-100 Pad firmware reflash file!P0k0iL5S!0H9VxkXnNYFbV7vmm_OPDNgXAKMmXFPDA_kFkbDckNQ

2) Paste the file on laptop desktop, connect X100 Pad with laptop

3) Contact Xtool Auto Key Programmer factory technician via Teamviwer

4)  They will help reflash firmware.

Hope it helps!

How to use Xprog to read CEM from Volvo S40/V50/C30/C70 2004

Xprog manual: how to read CEM units from Volvo S40/V50/C30/C70 2004-

It’s Xprog working for Volvo S40/V50/C30/C70 2004-

Xprog box 5.7.0

It is CEM unit used on S40/V50/C30/C70 2004-

This CEM has already get clone in a company.
open it up and saw 5 soldering spots to the left from the big black chip.


Read it with Xprog for example.


XPROG V5.70 connection attached.


Pin Assignments in 80-pin QFP for MC9S12DG256


You have to read MC9S12DP256 and MC9S12DP128.

Both of them have EEPROM and FLASH
You have to read them out separately and then you have two bin files per chip.

And then you will have 4 files.

If you know what to look then you can find it in HEX. But otherwise it’s just some numbers and letters.