This details out what exactly is needed to add/change RPO option codes to existing 97+ Corvettes using GM Tech2 scan tool. This scanner can be purchased from here for around $300. This is helpful on 2001+ ZO6s to add the T82 Automatic Headlamp operation at night feature as well as adding the tire pressure monitoring function. Both of which are built into the ZO6s Body Control Module (BCM) and just need to be “turned on” in order to work. The Automatic headlamp function usually requires no parts to be purchased but the tire pressure monitoring system needs to have sensors installed on all 4 tires. These can be found in the classified section of corvetteforum.com usually for around $200.00. These instructions will also help owners of F45 real time dampening suspension option convert to regular shocks that do not have sensors built in. Right now people are paying upwards of $200.00 for emulators that plug into the wiring harness to trick the BCM. A simple solution is to just go into the BCM function and toggle off the F45 suspension options. No codes will be set and the car will not go into reduced engine power mode.
Top 8 Reasons to Get Tech2 Scanner:
1.TIS2000 for GM can programming GM Models before 2007 year. (GM TIS2000 comes with the parcel, no need buy alone)
2. TIS2000 for SAAB can programming SAAB Models before 2007 year. (SAAB TIS2000 Need Buy Alone)
3. Best diagnose and program tool for GM
4. Can be Updated by 32mb card
5. Multi-Language: English/ German/ Spanish/ Japanese/ French/ Italian and others
6. Can do diagnose, scan in one tool for 6 cars: GM/ SAAB/ OPEL/ SUZUKI/ ISUZU/HOLDEN (Need buy 4 cards more)
7. For Opel software update to newest V165,supports 1997-2014 year.
8. For Holden software update to V149 version,supports 1999-2013 year.
Step 1: Obtain GM TECH2 scanner
Step 2: Startup TECH II scanner
Step 3: Enter Diagnostics menu
Step4: Enter year of car
Step5: Enter Passenger Car menu
Step 6: Select Body from the menu
Step 7: Select Y body from menu
Step 8: Select body style from menu (Coupe/Sedan is FRC/ZO6)
Step 9: Select transmission type
Step 10: Enter body control module menu for adding/deleting option codes such as automatic headlamps,F45 suspension. If your interested in adding the tire pressure monitoring system please skip to Step 15 below.
Step 11: Enter Special Functions menu
Step 12: Enter BCM RPO Reprogram
Step 13: Enter cars country of origin
Step 14: Toggle functions on and off. The asterisk next to the option code indicates this function has been turned on. Note that the Automatic and Manual HVAC controls are both turned on. This is normal and should be ignored. Go ahead and hit the save option button when your done and power off the TECH2.
Setting up tire pressure monitoring
Step 15: Enter Remote function actuation menu
Step 16: Enter special functions menu
Step 17: Enter set options menu
Step 18: Enter tire pressure monitor menu
Step 19: Toggle function on and hit save options and power off TECH2
When you finished go ahead and train your tire pressure sensors through the driver information center.