Xhorse VVDI Prog to read Delphi MT60 MT80 with TRICORE

Read EEprom + Flash very easy by can line Am29f400.

Xhorse VVDI-PROG Auto Key Programmer Main Feature:

1. The built-in update software allows user to update VVDI Prog firmware timely.
2. High-speed USB communication interface enable the software automatically connect.
3. Smart operation mode: the possible causes of error will be listed
4. Reserve ports: for future update.
5. The self-test function enable you check if the machine works well.
6. Can supply power via USB cable, the software will automatically prompt if the external USB power supply is needed.
7.Buy VVDI-Prog programmer, get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service

Here’s the pinout Delphi-MT60/MT80 with TRICORE shared by Xhorse VVDI Prog programmer user carcity from DK forum.


Delphi MT60/MT80
With Tricore IC
Connection by VVDI Prog ECU cable :
(Note: unsolder PIN 122 from PCB )






How To Used OBDSTAR X300 DP Program Mitsubishi Lancer EX All Keys Lost

One of our customers has tested OBDSTAR X300 DP /Key Master DP tablet on a Mitsubishi Lancer EX when all keys have lost successfully.

OBDSTAR X300 DP Standard  Version Features:

Read and clear fault codes;
Clear key memory;
Program keys, proximity keys, smart key, flip keys;
Program after-market and OEM keys;
Display live data;
Component actuation;
Read keys from immobilizer memory
New ECU programming;
New mechanical key number programming;
Vehicle identification key programming;
Reset ECU& Reset immobilizer;
New remote controller programming;
Immo PINCODE reader;
Mileage adjustment via OBD;
With full and strong database for the most important vehicle makes;
VCI diagnose
One key upgrade via wifi
Remote assistance
Built-in repair video
Report center
EEPROM chip read and immobilizer initialization;
EEPROM/PIC adapter

Easy steps:
Select Immobilizer->Mitsubishi->Mitsubishi V30.36->Select region Asia->Lancer EX->Without smart (non-smart key)

Turn ignition to on position

select All keys lost

OBDSTAR Auto Key Programmer Master DP will require to enter security code to access

The security code of LANCER is SA02 usually
Turn ignition off

Program success, whether to program next key?
Press ENTER to continue
Follow system prompts
Program success

Test the new key. Working.


Update ! (2017-12-31) Xhorse VVDI Prog Update to V4.6.6

Xhorse VVDI PROG programmer latest software version V4.6.6 updated on 31/12/2017.

TOP 6 reasons to get V4.6.6 VVDI PROG Programmer 

1. Built-in update software: Make VVDIProg firmware update timely.
2. High-speed USB communication interface: Make software automatically connect.
3. Smart operation mode: possible causes of error will be listed
4. Reserve ports: For future update.
5. Self-test function: Check if the machine works well or not.
6. Power supply: Through USB cable, software will automatically prompt if the external USB power supply is needed

VVDI Prog Auto Key Programmer  v4.6.6 (2017-12-31)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.6 version in Doc folder
* Fix MC9S12XS series write error problem
* Fix EWS3 ADAPTER R&W error problem
* Fix SPC56AP series write error problem
* Fix D70F3356 write error problem
* Upgrade MB91F061 option, support R&W PFLASH
+ Add TMS370C002A, TMS370C010A, TMS370C012A, (Need TMS370(PLCC28) ADPATER) TMS370C020A, TMS370C022A, TMS370C032A, TMS370C040A,
TMS370C042A, (Need TMS370(PLCC44) ADPATER) TMS370C050A, TMS370C052A, TMS370C056A, TMS370C058A,TMS370C256A (Need TMS370(PLCC68) ADPATER)
options in <2-MCU>-><TI-TMS370>
+ Add REGAL-KG-MODULE(2014) option in <4-IMMOBILIZER>-><BUICK>
+ Add MG-GT-DASHBOARD(2014) option in <5-DASHBORAD>-><SAICMOTOR>
+ Add PTS-W221, TRCM-W221 options in <8-OTHER>-><BENZ>
+ Add X5-LCM option in <8-OTHER>-><BMW>

Free download vvdi prog v4.6.6 software


How To Used OBDSTAR X300 DP Program Audi Q5 2011 Smart Remote Key by OBD

How to program smart remote keys on a Audi Q5 year 2011 5th Immobilizer system using OBDSTAR X300 DP and RFID adapter via OBD.

Devices required:

OBDSTAR X300 DP Pad (Key Master DP) full version

VCI interface (included in full package)

OBDSTAR RFID adapter (purchased separately)

1 working key and a new key

OBDSTAR X300 DP PAD Andriod Tablet Key Programmer  Standard Configuration

Language: English, simplified Chinese, traditional Chinese, language customization.

This is X300 DP Standard Configuration,comes with these function :Immobilizer+ Odometer Adjustment+ EEPROM/PIC Adapter +OBDII

If you need more function ,please choose X300DP Full Configuration:Immobilizer+ odometer Adjustment+ EEPROM/PIC Adapter+ OBDII+ ABS+ TPS+ SRS Reset+ TPMS(Low Tire) Reset+ Steering Angle Reset+ CVT Learning/Value Reset+ EPB+ Oil/service Reset+ Battery Matching+ Diagnosis (Japanese and Korean Serials)

X300 DP Standard version is the first tablet of OBDSTAR, which has reached a higher level in key programming and diagnosis. Inheriting from OBDSTAR professional auto programming and advanced diagnosing technology, X300 DP is characterized by covering wide range of vehicles, featuring powerful function, and providing superior quality. Meanwhile, taking advantage of Android system, X300 DP integrates more application and service, such as Maintenance Database, remote assistant, and One Key Update etc.


Connect VCI with RFID adapter and vehicle

Select Diag Program->Immobilizer->VW/Audi/Skoda/Seat->Audi->Program Keys

Select 5 generation immo->A4L/A5/Q5

Select Read Immo Data

Turn ignition switch to ON with programmed remote
Reading immo data

save immo data

Select Show Immo Info
Choose Audi Q5 saved file

OBDSTAR X300 DP PAD will display vehcile immo data VIN, CS,PIN code, key number etc info

Select Make Dealer Key

Put a new key into RFID adapter

If X300 DP display error “failed to connect to RFID”
You must update RFID before make dealer key

How to update RFID firmware?
Go to immo selection menu

Select RFID Update
Updating firmware

Firmware finished, the indicator on RFID turns green
Select Make Dealer Key
Choose saved file
Put a new key into RFID
Write data to key
Write success

Select Program Keys->Open Audi Q5 saved file

after recognized by vehicle, the Auto Key Programmer key will be locked and unable to unlock.
Press YES to continue

Enter key number: 2 and confirm
Turn ignition on and press Enter to go on

Insert 1st key turn on

Key number 1/2 already programmed
Insert 2nd new key and turn on ignition for smart system

key number 2/2 already programmed

Success to recognize keys
Key lean mode completed and success
Try to start all keys


Wie zu beheben MB SD C4 kein Zugriff Autorisierungscode Fehler

Kürzlich hat ein Kunde einen Mercedes Benz SD C4 auf  fobdii.com gekauft, nachdem er die Aktivierungsdatei heruntergeladen hat, bekam er beim Ausführen der MB  SD C4 Software einen “No Access Authorization Code Error” . Unten ist die E-Mail, die ich vom Kunden erhalten habe:

“Liebe Cathy,

Ich habe die Aktivierungsdatei heruntergeladen und sie in die Registrierung “eingebunden”.

Wenn ich versuche,MB Star Diagnostic Tools DAS auszuführen, erhalte ich eine Fehlermeldung, dass der Schlüssel ungültig ist.

Siehe angehängte Dateien. Was tue ich als nächstes? mb-sd-c4-berechtigung-1


Vielen Dank

Angelo ”


Wenn Sie die gleiche Fehlermeldung haben, machen Sie sich bitte keine Sorgen, dieser Fehler wird einfach dadurch verursacht, dass die Xentry-Software nicht aktiviert ist. Bitte senden Sie Ihre Hardware ID (HW ID) an  service@fobdii.com  und unsere Techniker werden die Software für Sie aktivieren. Bitte beachten Sie: Wir können keine Aktivierung für Bestellungen von anderen Anbietern bereitstellen.


Why Choose Engineer with Software Real MB Star C5

After test, Real MB Star C5 with engineer software performed good and now is released.

Unlike the old clone C5 which uses C4 Internet Software, this Real MB C5 is 1:1 copy star C5. The newest hybrid W222 could still be diagnosed by this real Benz C5.this Benz XENTRY Connect C5 is really equipped C5 engineer Internet software (internal HDD + portable HDD). What’s more, this Real MB C5 has no limit for computer brand only requires 4GB storage at lease.

Following text shows the Real MB Star C5 features and some use tips. Move ahead.

First post picture of this real MB Star C5

Real MB star C5 features:

  1. It improves a lot in hardware and software.
  2. With engineer software
  3. Comes with one internal disc and one portable hard disk.
  4. Comes with no computer.
  5. No computer brand limit as long as the computer has 4GB storage at least and running Windows 7 – 32-bit or Windows 8 – 32-bit.
  6. Update: for common update, dealer send update files to user for update; for special update, the user is supposed to ship back the disk to flash.
  7. Real MB star C5 communication: Via Wlan (IEEE802.11 a/b/g/n2.4+5GHZ )
  8. The licensing system is reworked – now licenses are stored on MB servers – Any license changes are tracked by the multiplexer when connected to the Internet network.

Why should buy MB Star Diagnostic Tools Xentry connect?

After 2015, all Star Diagnosis equipment is no longer supported. That means there is no update diagnostic data for the newest cars and their systems. The lack of the possibility of coding and programming of electronic units due to the backlog of the software data level in the device, from data in the electronic control units of the car.

At the end of 2014, among dealerships, almost all of them who previously used Star Diagnosis Compact4 with SDConnect DoIP multiplexers were almost gone. Instead, dealerships choosed Xentry Kit kits which include the latest Xentry Connect multiplexers and Xentry Tab tablets from Panasonic. Tablets are custom-made, also they have a “civilian” version – the Panasonic Toughbook CF-D1, which has a more powerful configuration but shorter battery life than the original Xentry Tab.

Honestly, it seems exaggerated for non-dealer use Xentry Tab. While for dealers, that is necessary.

And what about workshop service?

Undoubtedly, the tablet from Panasonic is well while the price is too high. The cost of the Japanese tablet is realistic to buy pieces of eight new laptops or tablets from other manufacturers.

So , we suggest to buy Xentry connect from us , then buy a laptop yourself . the software from which Xentry Connect is managed can be installed without any problems on any computer that has a 32-bit version of Windows 7, Windows 8 or Windows 10. It’s clear with Xentry Connect itself – there’s no alternative .

After all, in this choice there are many reasons that encourage one to make a decision. The main thing is one: since 2015, the diagnostic multiplexer Xentry Connect C5 becomes the only one used at dealerships.

Thus, by purchasing this equipment, you do not lag behind the progress. You use in your work the best that is available today. Each your client, seeing with his own eyes that you in your work use the same device that he saw at the dealer’s service station, will understand that he made the right decision entrusting his car to your specialists.

Real MB star C5 price:

As for the price, real MB Star C5 will be sale 1095 EURO in eobdtool.co.uk without shipping cost. The price is about 2 times higher than the old C5.

Here is the link in fobdii.com:


How To Solved MB Star Diagnostic Tools DAS license key is corrupted

I got 12.2017 Xentry Windows 7 and the DAS is giving me the following massage:

Top 8 Reasons to Get MB SD Connect C5:

1. Support wireless diagosis

2. Supports K line and CAN BUS diagnosis, besides UDS protocol diagnosis. While MB STAR C4 main board does not have UDS chip and so not support UDS protocol diagnosis;
3. The multiplexer now uses Lan cable to connect;
4. The connector adopts Military quick swap technology, you can plug/unplug it for 10,000 times, always working stable;
5. All core accosseries adopts original new packing chip, tested for 24hours to guarantee the quality of the products;
6. Support offline and online programming, if you want to do online programming, please buy online SCN coding service
7. Support Mercedes Benz Cars after year 2000
8. Multi-Language available: English/Bulgarian/Danish/Greek/Spanish/French/Italian/Korean/Polish/Romanuan/Serbo-Croatian/ Turkish/Czech/German/Finish/Hyngarian/Japanese/Dutch/Portuguese/Russian/Swedish/Chinese


your license key is corrupted

please contact support@...



DAS need activation.

Xentry/DAS activation help:

Step 1: Run StartKeyCenter to get ID for activation

Open “StartKeyCenter” on Desktop, to get the SD connect c4 Hardware ID and App ID

xentry-das-activation (1)

Complete Licence information (Hardware ID, App ID, StartDay, ExpirationDay), then click “Generate” to get License String

xentry-das-activation (2)

Copy License String, then go to “StartKeys”, click “Enter” to read StartKey, then “Save” data

xentry-das-activation (3)

Step 2: Reactivate Xentry/DAS

Go to Local Disk C:/ ProgramData/ LicDir, the copy and paste “lic_key_2.dat”, re-name as “lic-key_2.x4711”

xentry-das-activation (4)

Setup Properties of “lic-key_2.x4711”, select Read-only

Then open XENTRY Diagnostics Openshell and close it

(NOTE: this avoids the activation code to be lost and reactivate XENTRY)



V2017.12 MB SD C4 Software Functions:

1.1989~up to now Car, Bus, Truck, Sprint, Smart ;
2.All electric system Diagnostic;(Do not include flash code)
3.reading trouble code
4.erasing trouble code
7.component testing
9.information consultation
10.component location diagram
11.wiring diagram

But come customer don’t know how to select truck diagnosis when run the XENTRY, so now, this is the process for you:

1. Run the XENTRY software and take some pictures shown below, go on reading ……

Xentry 12/2017 Startup running

MB SDConnect C4 supported vehicle selection, select TRUCK.

This is MB SD C4 XENTRY supported Mercedes Benz Truck list

Select LKW for example, choose Automatic access using model series.


How To Solved V2017.09 MB Star C4 Xentry No Access Authorization

The newest version for mb sd c4 software now is MB SDConnect software V2017.12

V2017.12 MB SD C4 Software Functions:
1.1989~up to now Car, Bus, Truck, Sprint, Smart ;
2.All electric system Diagnostic;(Do not include flash code)
3.reading trouble code
4.erasing trouble code
7.component testing
9.information consultation
10.component location diagram
11.wiring diagram

Functions For Launch EZcheck EZ Check OBDII Scan Tool

Launch EZcheck is a new diagnostic code reader trusted by mechanics and developed by Professional Engineers in 2017. Having complete access to engine control units, it ia as easy to use as handheld code reader plus the benefits of your smartphones. Once plugged into your vehicle’s 16pin OBDII DLC, the unit will power up and prompt you to start your ignition. If your vehicle has a Check Engine Light comes on, you can use EZcheck to read the error codes, find out what the problem is, and perhaps fix it. Save your time and money before going to a workshop.

Launch X431 EZcheck is a new design OBDII Scanner. X431 EZcheck work with phone same as  Launch Easydiag and Launch M-diag. You directly download “EZdiag” app from Android or Iphone will be ok. EZcheck can read fault code and clear code same as X431 Easydiag and X431 M-diag.

Launch x431 EZcheck EZ Check OBDII Scan Tool Functions:
1. Easily determines the cause of the “Check Engine Light (MIL)”.
2. Reads hard (memory)/pending (intermittent) and historic codes and show definitions.
3. Turns off Check Engine Light (MIL), clears codes and resets monitors.
4. I/M monitor readiness test.
5. Retrieves vehicle information (VIN).
6..Read data stream