HOW CAN I USE MB SDConnect C4 FOR TRUCKS?

V2017.12 MB SD C4 Software Functions:

1.1989~up to now Car, Bus, Truck, Sprint, Smart ;
2.All electric system Diagnostic;(Do not include flash code)
3.reading trouble code
4.erasing trouble code
5.live-data
6.adaptation
7.component testing
8.maintenance
9.information consultation
10.component location diagram
11.wiring diagram

But come customer don’t know how to select truck diagnosis when run the XENTRY, so now, this is the process for you:

1. Run the XENTRY software and take some pictures shown below, go on reading ……

Xentry 12/2017 Startup running

MB SDConnect C4 supported vehicle selection, select TRUCK.

This is MB SD C4 XENTRY supported Mercedes Benz Truck list

Select LKW for example, choose Automatic access using model series.

http://www.fobdii.com/category-15-MB-Star-Diagnostic-Tools.html

How To Solved V2017.09 MB Star C4 Xentry No Access Authorization

The newest version for mb sd c4 software now is MB SDConnect software V2017.12

V2017.12 MB SD C4 Software Functions:
1.1989~up to now Car, Bus, Truck, Sprint, Smart ;
2.All electric system Diagnostic;(Do not include flash code)
3.reading trouble code
4.erasing trouble code
5.live-data
6.adaptation
7.component testing
8.maintenance
9.information consultation
10.component location diagram
11.wiring diagram

MB Star SD Connect C4 VS SD Connect C5

I. The software of MB SD Connect 5 and MB SD Connect 4 is same
II. But the hardware of MB SD C5 is better and stable than MB SD C4:

1. The host CPU radiator surface and perfectly fit alloy shell, good heat dissipation effect. Equipment running smoothly, don’t crash.
2. The host USES the tamper clasp, should to avoid fragile warranty sticker damage caused by the warranty disputes.
3. Host wi-fi protected the upgrade for PC plastic shell, solid quality does not affect the wi-fi signal.
4. The host communication connection end USES from design, to avoid inadvertently fall in the normal use of the communication port to connect and communication failure, etc.
5. DC 12 v power supply design/host upgrades to avoid the battery installation/battery voltage instability/host can’t enter the shutdown state, etc, caused by the motherboard and rapid aging of the battery.
6. OBD main telecommunication lines connected to the host end upgraded to VGA15 industrial-grade connector.
7. Network upgrade for gigabit connections/pure copper wire core/double layer aluminum foil/woven mesh/silica insulation material. Gigabit communication Against interference/pulling open circuit / / fracture in low temperature.

 

 

MB SD C4 Please insert batteries and initialization failed

Mercedes Benz MB SD Connect Compact 4 MB Star diagnostic system “Please insert batteries” and

“Initialization of diagnosis multiplexer failed” solution are provided.
Problem:

One of the Mercedes MB SD Connect C4 user has the problem when using the star C4 diagnostic system.
Error 1: Please insert batteries.

mb-sd-c4-insert-battery-1-1
Error 2: Initialization of diagnosis multiplexer failed

mb-star-error

Possible reason:
He has not got the MB SD C4 connected with Dell D630 laptop to build communication.
Solution:
Check the SD Connect C4 icon on the bottom of the toolbar, power on the SDConnect and connect the diagnostic scanner with computer, if the #21 device displays in “x” status,it indicates the C4 multiplexer is not well connected or well configured,how to tell:

1.Open laptop Local Network Connection->SD C4 WLAN,disconnect then connect to check if network connection has changed. If the network remains unchanged,change another laptop and do the same setting.

2.If network status did not change on any laptops,then change a new LAN cable.If still no changes,you have to send back your SD C4 main unit for repair.

How to use Chinese MB SD C4 WIFI with Dell D630 correctly?

How to use Chinese MB SD C4 WIFI with Dell Laptop D630 correctly? And make it works like charm, there are some important tips the users are supposed to follow, otherwise the error may be followed. Go on reading following parts, I am sure you will find it helpful.

Following parts are collected from MB SD C4 users’ experience, which will guide the first beginners how to use MB SD C4 correctly.

Feedback: MB Star C4 with Laptop via Wifi connectivity
Active:

It is plug and play, I just plug the HDD from seller to my Dell D630 Laptop and all I needed to do was activate WIS/EPC and XENTRY/DAS with “activation keys” by following pdf:

Using External HDD feedback:

I have been playing with xentry for about a year now and had similar problems,

The external HD is slow and you have permanent trouble with the com port setting.

No matter if you use a virtual machine or the direct installed software.

All com ports have to be named Com2 and speed set to 9600 or 115200 in system settings. No matter if the are USB ore not.

I tried the USB converter but the setting changed every time i plugged it in.

Tips:

No Copy: I got very frustrated with the Chinese clones an my experience with there support was less pleasant.
Specially the so called “Chinese lock” that prevents you from HD copy’s and creating backups.

2) No update: My background is in computer science so I went out and tried to Install the Software from scratch.

After endless hours on the computer and purchase of some Key Generators and CD’s, I was able to Install

Xentry / DAS SD Connect / WIS / EPC / PL69 SD Media / Starfinder / Vediamo

and convert it to offline use.

This setup runs way faster, does not try to update or connect to MB server and works so fare on 3 different computer types.

Some unpleasant experience, but finally works great:

In the meantime I upgraded to a C4 same bad experience with the Chinese source first one worked but the display was not functioning.

The second one started smoking when I put the batteries in. Reason was the purely glued battery contacts created a short to the housing. After fixing this issue the C4 works great.

Compare with C3:

SD C4 is faster than the C3 no more com port issues it uses Ethernet or WiFi.