How to used GM Tech2 scanner disable DRLs

It is possible to get daytime running time disabled manually. But the problem can be easily settled with a scanner. GM Tech2 scanner is ultimate best choice for GM group.

GM Tech2 is Professional GM Diagnostic Scan Tool. Tech2 scanner supports all GM systems from 1992 to 2011.Tech2 has powerful function which make it is first choose by most GM vehicles repairer.

Tool needed:
GM Tech2 scan tool

Vehicle model example: 2003 Chevrolet Cavalier

1. Turn the vehicle ignition to ON position with engine off. Plug the Tech2 scanner into the vehicle OBD diagnostic port. Power on the GM tech2 scan tool. Press “Enter” to continue.

2. Select “F0: Diagnostic” function in the main function menu.

3. Select vehicle model, here take “2003” as an example

4. Select your vehicle type, like “Passenger car”

5. Select “F1: Body” under Diagnostic function list

6. Select your vehicle body Product Line, here “J”

7. Select your vehicle manufacture, here “Chevrolet”

8. Select specific vehicle model, “Cavalier”

9. Select “F1: Body Control Module” under Body function list

10. Then go to select “Specific functions”

11. Select “New BCM setup” under special function list

12. Click “Yes” when the device screen pops out “Do you want to setup a new BCM?” notice.

13. If the screen prompts fails to program VIN message, click “Enter” to proceed operation.

14. Click “Yes” to accept the requirement.

15. Select an option with the arrows keys by follow the screen instructions. Click “Continue” to move on the next step. (Ignition switch should be ON)
GM Tech2 Scan Tool to Disable DRLs
16. Select your vehicle model region and saving option setting.

If you wan to change the vehicle region, go back to previous setting. Select the region you want, like “Mecixo”

Again accept the screen notice by click “Continue”

17. Select BCM module you need to program, here choose “PRO T62”

18. The new BCM setup procedure is complete and the daytime running lights turn off.

32MB Card for GM TECH2

http://www.fobdii.com

Real User Experience For GM TECH2

Bought GM TECH2 at 12-12-2017
I bought one GM TECH2 (FSP23-1). Hopefully I’ll get it
GM Tech2

GM TECH2 Scanner Features:

1) GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
2) Support for on-board diagnostics on all GM systems 1992 thru current year.
3) Removable hardware modules provide insurance against scan tool obsolescence.
4) Large, easy-to-read backlit screen.
5) RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6) Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7) Ability to view the status of vehicle diagnostic tests as they run.
8) Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.

Vetronix Tech 2 Specifications

1) Microprocessor: 32 bit,16 MHz
2) Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
3) Communications: Integral RS232 communication port.
4) Screen: 3.8.8 backlit monochrome with full graphics capability: 320,40 pixels. Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 Mb)

An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; You will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.

Received package at 12-19-2017
Well I finally got the tech2,i had to file a dispute through PayPal though. They sent me several emails on the status but one asked for my phone number for shipping, only problem was it was a no reply email and there was no way of sending the number through their website, so I started a dispute. Within hours I got a normal email from them and sent the phone number. The tech2 arrived 2 days later. it looks and feels exactly like the gm one, and I have been using these things since they changed from the tech1 to the tech2,i have years of experience with it and it works exactly like any others I’ve used at gm dealers over the years.im happy with it, even though the shipping was a lot, it’s still a great deal.462.00 for a brand new tech2 with a candi module all the cables and adapters and case is great.
GM  TECH2 Scanner Using Experience:
So far I only connected to my intimidator ss and everything was there, haven’t used it on the corvettes yet, but I would imagine it should be able to set up a BCM. i would like to change one of my c5s that is canadien to US to disable the auto headlights because they don’t always open when they should and when they do work right they come on too early.

it will do the relearn, I’ve used it some more since my last post and it does everything a real tech2 does, and I’ve been using the real one professionally since its inception. Mine came with the 32 mb card. you have to specify GM English when you order the unit. There are a lot of other cards for different languages Saab, Holden, etc

http://www.fobdii.com/wholesale-2-gm-tech2-in-carton-package.html

How to used GM Tech2 adding Corvette RPO option codes

This details out what exactly is needed to add/change RPO option codes to existing 97+ Corvettes using GM Tech2 scan tool. This scanner can be purchased from here for around $300. This is helpful on 2001+ ZO6s to add the T82 Automatic Headlamp operation at night feature as well as adding the tire pressure monitoring function. Both of which are built into the ZO6s Body Control Module (BCM) and just need to be “turned on” in order to work. The Automatic headlamp function usually requires no parts to be purchased but the tire pressure monitoring system needs to have sensors installed on all 4 tires. These can be found in the classified section of corvetteforum.com usually for around $200.00. These instructions will also help owners of F45 real time dampening suspension option convert to regular shocks that do not have sensors built in. Right now people are paying upwards of $200.00 for emulators that plug into the wiring harness to trick the BCM. A simple solution is to just go into the BCM function and toggle off the F45 suspension options. No codes will be set and the car will not go into reduced engine power mode.

Top 8 Reasons to Get Tech2 Scanner:

1.TIS2000 for GM can programming GM Models before 2007 year. (GM TIS2000 comes with the parcel, no need buy alone)
2. TIS2000 for SAAB can programming SAAB Models before 2007 year. (SAAB TIS2000 Need Buy Alone)
3. Best diagnose and program tool for GM
4. Can be Updated by 32mb card
5. Multi-Language: English/ German/ Spanish/ Japanese/ French/ Italian and others
6. Can do diagnose, scan in one tool for 6 cars: GM/ SAAB/ OPEL/ SUZUKI/ ISUZU/HOLDEN (Need buy 4 cards more)
7. For Opel software update to newest V165,supports 1997-2014 year.
8. For Holden software update to V149 version,supports 1999-2013 year.

Defrost vent:
adding Corvette RPO option codes with GM Tech2
adding Corvette RPO option codes with GM Tech2
Step 1: Obtain GM TECH2 scanner
adding Corvette RPO option codes with GM Tech2
Step 2: Startup TECH II scanner
adding Corvette RPO option codes with GM Tech2
Step 3: Enter Diagnostics menu
adding-Corvette-RPO-option-codes-with-GM-Tech2-3
Step4: Enter year of car
adding Corvette RPO option codes with GM Tech2
Step5: Enter Passenger Car menu
adding Corvette RPO option codes with GM Tech2
Step 6: Select Body from the menu
adding Corvette RPO option codes with GM Tech2
Step 7: Select Y body from menu
adding Corvette RPO option codes with GM Tech2
Step 8: Select body style from menu (Coupe/Sedan is FRC/ZO6)
adding Corvette RPO option codes with GM Tech2
Step 9: Select transmission type
adding Corvette RPO option codes with GM Tech2
Step 10: Enter body control module menu for adding/deleting option codes such as automatic headlamps,F45 suspension. If your interested in adding the tire pressure monitoring system please skip to Step 15 below.
adding Corvette RPO option codes with GM Tech2
Step 11: Enter Special Functions menu
adding Corvette RPO option codes with GM Tech2
Step 12: Enter BCM RPO Reprogram
adding Corvette RPO option codes with GM Tech2
Step 13: Enter cars country of origin
adding Corvette RPO option codes with GM Tech2
Step 14: Toggle functions on and off. The asterisk next to the option code indicates this function has been turned on. Note that the Automatic and Manual HVAC controls are both turned on. This is normal and should be ignored. Go ahead and hit the save option button when your done and power off the TECH2.
adding Corvette RPO option codes with GM Tech2
Setting up tire pressure monitoring

Step 15: Enter Remote function actuation menu
adding Corvette RPO option codes with GM Tech2
Step 16: Enter special functions menu
adding Corvette RPO option codes with GM Tech2
Step 17: Enter set options menu
adding Corvette RPO option codes with GM Tech2
Step 18: Enter tire pressure monitor menu
adding Corvette RPO option codes with GM Tech2
Step 19: Toggle function on and hit save options and power off TECH2
adding Corvette RPO option codes with GM Tech2
When you finished go ahead and train your tire pressure sensors through the driver information center.
adding Corvette RPO option codes with GM Tech2
adding Corvette RPO option codes with GM Tech2
Enjoy!

http://www.fobdii.com

GM Tech2 Scanner vs HP Tuners works for ALL systems

What is GM Tech2:

GM Tech2 Scanner Features

1) Support for on-board diagnostics on all GM systems 1992 thru current year.
2) GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
3) Removable hardware modules provide insurance against scan tool obsolescence.
4) Large, easy-to-read backlit screen.
5) RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6) Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7) Ability to view the status of vehicle diagnostic tests as they run.
8) Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
9) Microprocessor: 32 bit,16 MHz
10) Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
11) Communications: Integral RS232 communication port.
12) Screen: 3.8.8 backlit monochrome with full graphics capability: 320,40 pixels. Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 Mb)

An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.

The GM Tech2 Scanner tool, working with TIS2000 software, supports onboard diagnostics and full bi-directional control when performing powertrain, chassis and body diagnostics for GM/SAAB/OPEL/SUZUKI/ISUZU/Holden.

tech-2-package

What is HP Tuners:

The HP Tuners vcm suite is the most feature rich, powerful and comprehensive vcm/PCM reprogramming and diagnostics package available on the market today. Vcm suite is the ultimate tuning tool designed for basic Tuners to advanced tuning shops.

hp-tuners-for-sale

GM Tech 2 vs. HP Tuners:

HPT can only work with ECM and TCM

Tech II can work with ABS, BCM, etc. (all systems)

But, Tech 2 can only change/do stuff GM intended where HPT can change all kinds of tables GM wouldn’t want us messing with

So both have pluses/minuses depending on what you want to do

Techii Scanner tool:

confirmed to works good for ALL systems

I just checked my Tech II clone against my 2006 C6. In the ABS section there is an “Automated Bleed” option. In the Radiosection there is a “VIN Relearn” option. I’ve never actually used either one, but I bet it works.

The Tech II clone is literally running the same software as the Tech II, so it has all the same functions. There are a few caveats: the standard clone power supply will cause the unit to reset if you run the starter motor, apparently, though this can be fixed. Also, operating while tethered to a PC involves a bunch of licensing hacks and other nonsense. But you only need to do that if you want to flash the ECU firmware.

The Tech II lets you see (and individually reset) all the DTCs from all the modules. It also has a bunch of special functions and bidirectional capabilities.

It’s great as a standalone Car Diagnostic Tool  but it isn’t intended to modify ECU parameters like tuning software does. This is a tool for fixing the car, not modifying it.

http://www.fobdii.com/wholesale-2-gm-tech2-in-carton-package.html

How To used GM Tech2 disable GM Saab TPMS

GM TECH2 Scanner Features:

1) GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
2) Support for on-board diagnostics on all GM systems 1992 thru current year.
3) Removable hardware modules provide insurance against scan tool obsolescence.
4) Large, easy-to-read backlit screen.
5) RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6) Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7) Ability to view the status of vehicle diagnostic tests as they run.
8) Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.

Vetronix Tech 2 Specifications

1) Microprocessor: 32 bit,16 MHz
2) Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
3) Communications: Integral RS232 communication port.
4) Screen: 3.8.8 backlit monochrome with full graphics capability: 320,40 pixels. Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 Mb)

An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; You will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.

Equipment:
GM Tech2 scanner
CANdi interface (CANBUS)
32 MB PCMPIA memory card
A subscription Saab TIS2000 software CD
A laptop with wireless internet connection

NOTE:
CANdi interface, TIS2000 software CD and 32 MB card for gm tech2 can be purchased separately. GM Tech2 scan tool often comes with CANdi interface or TIS2000 software CD, you need to get the left stuff. If you need to do Saab vehicles, choose specific Saab TIS2000 software instead.

Vehicle model example: GM Saab 9-3

Instruction:

ⅠRemove BCM

Install 32MB card into GM Tech2 diagnostic scanner.
Install 32MB card into GM Tech2
Install GM Tech2 scan tool with CANdi interface connect it with vehicle via OBD socket
Install GM Tech2 scan tool with CANdi interface
Select model year
Select 9-3(9440)
Select Diagnostics
Select ALL
Select Add/Remove
Select BCM (Body Control Module)
Select Remove

ⅡRe-add the BCM
After removed the BCM, repeat the previous procedures and select Add

At this time, GM techii will list long lists of options for the car, like truck the presence of several optional items, like trunk switch in driver’s door, sunroof, TPMS, etc. For the functions you are not sure, Tech II scanner has an Auto-Suggest feature, where it will suggest the correct option.

Select vehicle region: EU (Europe)
(Do not select US for cars in US market are strictly set)

Select “Without TPMS” when the system pops out TPMS is preset notice
Answer the system questions prompted and instructions

Ⅲ Disable TPMS

Select model year
Select 9-3 (9440)
Select Diagnostics
Select All
Select Add/Remove
Select TPMM (Tire Pressure Monitoring Module)
Select Remove

The TPMS is successfully disabled.
Disconnect GM Tech2 from car’s OBD diagnostic socket.

http://www.fobdii.com/wholesale-2-gm-tech2-in-carton-package.html

GM Tech 2 Tech2Win bin files V182 PCMCIA Free Download

Free download GM Tech 2 bin files and Tech2Win bin files on the 32MB PCMCIA card for the GM Tech2 Car Diagnostic Tool via serial cable. ALL FREE FOR YOU, BUT YOU HAVE TO HOLD RESPONSIBILITY OF WHAT YOU’LL TRY.

Tech2 software the latest version:

North American Operations 30.007

Holden Export 122.001

Suzuki 30.004

SAAB Automobile AB 146.000

Download 1: not tested
https://mega.co.nz/#fm/3k8hRZTZ

File including:
New version Tech2 PCMCIA 165.000.rar English (used with TECH2 or with TECH2WIN)
Opel German 164.000.zip
Opel German 154.000.zip
Opel 150.020 English.rar
Opel_161.002.rar
Saab 148.000 English.rar
SAAB 148.000 32MB German
TECH 2 OPEL VAUXHALL V159.001.rar
Tech2-cardwriter.rar

Download 2: not tested
https://mega.co.nz/#F!JlhF2STa!8ElYLExLisPlBaRbIX5sjQ
Tech2 & Tech2Win PCMCIA 32GB Card Bin Files Opel Multi-Language

You have inside:
Opel 165 EN; DE ; FR ; IT
Opel English 165, 171, 172 and 175
Tech2Win v2.302
27.05.2015 – Added Opel version 176

Download 3: not tested
Tech 2 cards bin files in English:

Zip file contains:-

Cadillac 117.500.bin
Cadillac BLS 120.000.bin
Opel GT Chevrolet HHR V30.004.bin
China-1 29.002.bin
Holden 1997 – 2012 V157.000.bin
Saab 148.000.bin
Holden Export V149.000.bin
Saturn Astra V31.001.bin
Isuzu 107.021.bin
Suzuki 28.007.bin
Isuzu truck 11_530 1996-2011.bin
Isuzu truck 11_530.bin
ISUZU Truck CAN 122_050.bin
Suzuki 29.003 eng.bin
V33-002_NAO_EN.bin
nao 32.08.bin
vauxhall.bin
opel 137.000.bin
opel_160-000_en.bin
OpelVauxhall V166.00.bin

NOTE:
Tech 2 32MB memory PCMCIA is available here:
Tech2 32MB B Card

Download 4: not tested

Opel Tech2Win PCMCIA V182 Spanish:

https://drive.google.com/file/d/0B_C4k-_wPmotM3lFYXRSV09WODQ/view

Password:mhhauto.com

Download 5: not tested

Tech2win 32MB PCMCIA Card V182.000 English:

Part 1: https://mega.nz/#!QPYU2B5J!JvOBKyrB1bqpXuUXC8gJU8_HCAAtc3PTLwHMRGWkPz4

Part 2: https://mega.nz/#!MKIREarI!qjW5E_DD0n1UjwAYGkZyythcWj5U3qqYTDWKYmz5c7k

Password: mhhauto

Download 6: not tested

Tech2Win PCMCIA 32GB Card Bin Files Multi-Language (EN; DE; FR; IT):

https://mega.co.nz/#F!JlhF2STa!8ElYLExLisPlBaRbIX5sjQ

For all files above

Work on Tech2win only

NEVER TESTED by professionals

Download 7: safe, work great

Tech2 + Tech2win: tested and 100% working

www.fobdii.com/wholesale-2-gm-tech2-in-carton-package.html

Tech2Win PCMCIA 32GB Card Bin Files

http://www.fobdii.com/wholesale-3-32mb-card-for-gm-tech2.html

software includes:

Tech2Win GM     English 32.007
Tech2Win SAAB    English 148
Tech2Win OPEL    English 180 (Cars from 1997-2014)
Tech2Win Holden   English 149 (Cars from 1999-2013)
Tech2Win SUZUKI  English  01.210.020
Tech2Win ISUZU    English  K line 11.53;
Tech2Win ISUZU    English  CAN line 107.021

GM

GM-English 33.004 1991-2013

GM-Germany 32.007 1991-2013

GM-Spanish 31.007 1991-2013

GM-French 32.007 1991-2013

GM-Portuguese 32.007 1991-2013

OPEL
update to V180

OPEL-English 173,000 1997-2014

OPEL-Italian 133.001 1997-2014

OPEL-Germany 85.001 1997-2014

OPEL-Spanish 91.001 1997-2014

SUZUKI

SUZUKI-English 01.210.020

SAAB

SAAB-English 148,000

ISUZU

ISUZU CAN BUS-English 107.021 2006 to 2010
ISUZU-K-line is for ISUZU from 1998 to 2011

Holden

Holden-English 149,000 1999-2013

For 12V CARs only (no trucks)!!!

Diagnostics: cars from 1991 to 2013

Programming with TIS2000: cars before the 2007 year

(You are taking risk when programming a car, so it’s 100% necessary to use a 100% working software. For software untested, forget it. HIGH RISK!!!!!!!!!)

Tech2 Tech2win TIS2000 Car List:

GM
GM-English         32.007 1991-2013
GM-Germany      32.007  1991-2013
GM-Spanish       31.007   1991-2013

OPEL
OPEL-English     V180      1997-2014
OPEL-Italian       133.001 1997-2012
OPEL-Germany  85.001 1997-2008
OPEL-Spanish   91.001 1997-2009

SUZUKI
SUZUKI-English   01.210.020

SAAB
SAAB-English     148.000

ISUZU
ISUZU-English   CAN-BUS 107.021  2010-
ISUZU-English   K-Line  11.62   1996-2013  (new add)

Holden
HOLDEN-English  V149 1999-2013

Here are FAQs maybe helpful for some one. Enjoy!

How to get this bin file to work ?? I have tech2win working but dont know where to copy this bin file into….??

open TECH2WIN> select option Modify/View > choose quickstart > and look to Slot 0: Memory card image location

You can change your image with this or make new configuration

OR

Just rename this bin file Quickstart.bin and swap it with your old one .

How the hell to combine the files back to 1 bin file??

Extract with winrar it should then extract has 1 file
winrar should combine all parts

How to load software on a 32GB card on a Tech2 scanner?

Insert tech2 card into pcmcia port on laptop and use mce to write the required bin to card, once done remove card and place in tech 2 and power on.

Tech2 card writer is one of them but the method is much slower then reprogramming in pcmcia slot. Tech2 card writer can be downloaded free below as well.

Please can somebody assist me I have a Tech 2 with PCMIA 32MB cards and really need to find out what program can I use to read and write these via my laptop(elderly yet still 100%) with a PCMIA Port any correct info will be greatly appreciated.

You need Memory Card Explorer.