Xhorse VVDI Prog to read Delphi MT60 MT80 with TRICORE

Read EEprom + Flash very easy by can line Am29f400.

Xhorse VVDI-PROG Auto Key Programmer Main Feature:

1. The built-in update software allows user to update VVDI Prog firmware timely.
2. High-speed USB communication interface enable the software automatically connect.
3. Smart operation mode: the possible causes of error will be listed
4. Reserve ports: for future update.
5. The self-test function enable you check if the machine works well.
6. Can supply power via USB cable, the software will automatically prompt if the external USB power supply is needed.
7.Buy VVDI-Prog programmer, get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service

Here’s the pinout Delphi-MT60/MT80 with TRICORE shared by Xhorse VVDI Prog programmer user carcity from DK forum.

delphi-mt60-mt80-vvdi-prog-5

Delphi MT60/MT80
With Tricore IC
Connection by VVDI Prog ECU cable :
(Note: unsolder PIN 122 from PCB )

delphi-mt60-mt80-vvdi-prog-1

delphi-mt60-mt80-vvdi-prog-2

delphi-mt60-mt80-vvdi-prog-3

delphi-mt60-mt80-vvdi-prog-4

http://www.fobdii.com

Xhorse VVDI PROG Programmer Read 24cxx series EEPROM in Circuit Success

Tried Bosch eeprom and 24xx series and 93xx series with Xhorse VVDI Prog programmer, all working.

Original V4.6.5 Xhorse VVDI PROG Programmer

Main Feature:

1. The built-in update software allows user to update VVDI Prog firmware timely.
2. High-speed USB communication interface enable the software automatically connect.
3. Smart operation mode: the possible causes of error will be listed
4. Reserve ports: for future update.
5. The self-test function enable you check if the machine works well.
6. Can supply power via USB cable, the software will automatically prompt if the external USB power supply is needed.
7.Buy VVDI-Prog programmer, get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service

First test:

VVDI Prog read 24c02 eeprom

vvdi-prog-24c02-2

vvdi-prog-24c02-0

vvdi-prog-24c02-1

vvdi-prog-24c02-9

vvdi-prog-24c02-5

vvdi-prog-24c02-3

vvdi-prog-24c02-4

tried ST succeed as well

vvdi-prog-24c02-6

vvdi-prog-24c02-7

vvdi-prog-24c02-8

Another customer feedback:

Did some eeproms in circuit with vvdi programmer.
24c32 24c64
Had to try a different brand. Auto Key Programmer Then it worked fine. There is no connection diagnostic warning, like with xprog.

www.fobdii.com

What is the Best Tool to Read and Write BMW CAS4?

Here is some experience of which tool is best for reading and writing BMW CAS4, which may help you to get a safe tool…and know can “xprog safe or xhorse better?”.

 

If you want a cheap tool for CAS4, get a R270 or R280 programmer. But it’s not the best quality and maybe you have to rework the pcb to work better.

On a side note, Xprog does not want to do the job very well, I cannot recommend it.!

XHORSE VVDI PROG IS THE BEST FOR READING CAS.

VVDIprog does Cas4 + fine. the only tango adds pcf7939 chips

This is how VVDI prog read/write CAS4 5M48H.

Quick guide:

Open VVDI Prog software, select type, manufacture and model as MC9S12XEP100)

Click “Wiring Diagram”

Maximize wiring diagram: right click and select “zoom window”, then pull down window.

Follow the wiring diagram to connect CAS to the VVDI Programmer.

Start to connect the cable.

The left zone is done, next is to do the right zone.

In this wiring diagram, it only need to remove one 0 ohm resistor to read out data, but one CAS ECU structure is different another one, some needs remove more electronic parts; we will show how to do in the other videos.

Next is to remove this 0 ohm resistor.

Wiring is done, 0 ohm resistor is removed

Plug adapter into VVDI-Prog.

Close wiring diagram.

Select “New” – ” Read”

You see it is reading data very fast.

Reading data successfully, click “Save”

Next is to check data.
Open the data, drag the mouse to check, okay, data is all read out, close it.